MIX8411 Electrochemical Carbon Monoxide(CO) Gas Sensor

  • Target Gas: Carbon Monoxide/CO
  • Range :0-1000ppm
  • Application: Industrial monitors, leakage detection, fixed or portable CO detector

Send Email: sales@mixsen.com

Principle Introduction:

MIX8411 is an electrochemical Carbon MonoxideCO) sensor developed by Mixsen. It uses the principle of electrochemistry. There is a reference electrode inside the sensor, which greatly improves the stability of the sensors. When the sensor senses the carbon monoxide, the working electrode and the counter electrode react with the redox reaction, through measure the current to get the concentration of CO

Feature:

*High selectivity & sensitivity to CO

*High accuracy

*Linear output

*Environmental protection design

Application:

* Industrial monitors, leakage detection

* Fixed or portable CO detector

Technical parameters :

Item Specification
Target Gas Carbon Monoxide(CO)
Measurement Range 0~1000 ppm
Maximum Overload 2000 ppm
Output 0.1 ± 0.02 μA/ppm
Repeatability ±2%
Response Time(T90) < 20 Seconds
Resolution 0.5 ppm
Long Term Output drift <10% per year
Life Expectancy(in air) 3 Years
Operating Temperature Range -20 ~ 50˚C
Operation Press 0.1MPa±10%
Operating Humidity Range 15% ~ 95% RH, no-condensing
Note: All measurements were taken at 20˚C, 50%RH at 1013hPa

Get An Instant Quotation

Need more information, you can submit your request here.

+86 185 6625 9936

WeChat:18566259936

GoTop