MIX8419 Electrochemical Chlorine(CL2) Gas Sensor

  • Target Gas: Chlorine/CL2
  • Range :0-10ppm
  • Application: Industrial monitors leakage detection

Send Email: sales@mixsen.com

Principle Introduction:

MIX8419  Chlorine(CL2) Gas Sensor is an electrochemical Cl2 sensor developed by Mixsen. It uses the principle of electrochemistry. There is a reference electrode inside the sensor, which greatly improves the stability of the sensors. When the sensor senses the Chlorine, the working electrode and the counter electrode react with the redox reaction, through measure the current to get the concentration of chlorine.


*High selectivity & sensitivity to Cl2

*High accuracy

*Linear output

*Environmental protection design


* Industrial monitors leakage detection

Technical parameters :

Item Specification
Target Gas Chlorine/CL2
Measurement Range 0~10 ppm
Maximum Overload 20 ppm
Sensitivity 0.40 ± 0.80 μA/ppm (negative siginal)
Repeatability ±2%
Response Time(T90) < 120 Seconds
Resolution 0.5 ppm
Long Term Output drift <2% per year
Life Expectancy(in air) 2 Years
Operating Temperature Range -20 ~ 50˚C / 15~90% RH
Operation Press 0.1MPa±10%
Bias Voltage Not required
Note: All measurements were taken at 20˚C, 50%RH at 1013hPa

Get An Instant Quotation

Need more information, you can submit your request here.

+86 185 6625 9936